Emphasize production in steel houses a little more than in prefabricated houses. According to these models, whose skeleton will be shaped according to use, and which are completed with interior and exterior coatings after being applied as a carcass, the production time is slightly shorter than in prefabricated houses. For the skeleton of the body material, first of all, steel carcasses will be produced, and the material and carcasses are manufactured this steel body at the place of placement.
Follow us!
You can check out our other 3D videos on our Youtube chann
GENERAL FEATURES
PRODUCTION TECHNOLOGY: Material with European standard is used in the carrier system. Thin-Walled Galvanized C and U Profiles, which are drawn as one piece Cad-Cam controlled fully automatic continue roll-form machines, are used.
ASSEMBLY: Wall panels, roof trusses, purlins and mezzanine assembly are made using Special Screws and Bolts.
STATIC ACCOUNTS: In accordance with the European Standards and/or International Standards specified in Article 3; The suitability of the building for its intended use and the required seismic and static calculations according to the region where the building is located are made with Sap2000, CFS, STA4CAD, BRICSCAD, HAYESCAD programs according to the load values ??determined in the projects and standards.
DURABILITY: The exterior cladding is CE certified (fire and water resistant) cemented chipboard (Betopan- Fibercement).
FOUNDATION CONCRETE: Concrete should be poured in accordance with the concrete plan (foundation dimensions) to be given by our company. Foundation design, static, foundation and floor covering will be done by the buyer. The building is fixed to the ground concrete with anchors and steel dowels. An iron raft foundation or a steel mesh foundation should be prepared on the hardened ground.
TECHNICAL FEATURES
SNOW LOAD: 120 kg/m² , conforms to European standards. (It changes according to the snow load and altitude where the building will be built) (Changes according to demand.)
WIND SPEED: Depending on the desired properties, the snow load of the structure changes.
MEDIUM LOAD CAPACITY: According to European standarts, the building can be 200 kg/m² depending on the purpose and type of use. (Changes according to demand.)
EARTHQUAKE ACCOUNTS: Effective ground acceleration coefficient: Ao=0,45 (1st degree earthquake zone) Building importance factor (I=1) Live Load Participation Factor (n=0,3) According to the building use and type I=1 /1,2/ It is calculated as 1,4/1,5n=0,3/0,6.
THERMAL INSULATION: Thermal Insulation Regulation. (Changes according to demand.)
SOUND INSULATION: 120 kg/m², conforms to European standards. (It changes according to the snow load and altitude where the building will be built.) (Changes according to demand.)
FIRE RESISTANCE:Conforms to European standards.(Changes according to demand.
ROOF FEATURES
ROOF COVERING: 0,50 mm thick metal creme coating (Red Ral 3009 – Green Ral 6020) color11 mm OSB 3 coating(Changes according to demand.)
CEILING FRAME: 90 * 45 * 12,5 (Dx51) Quality C Profile (Changes according to demand.)
ROOF CARRIER SYSTEM: 90* 45*12,5 (Dx51) Quality C Profil (Changes according to demand.)
EAVES & EAVES VENTİLATİON: There will be 40 cm eaves on both sides of the building. Coating 10 mm Cement chipboard (Betopan – Fibercement) To prevent sweating, there is a ventilation grille on the forehead Vs of the scissors. (Changes according to demand.)
GUTTERS: Metal streams will be placed. Our company is not responsible for creek breakage that may occur in places with heavy snow load. (Changes according to demand.)
CEILING COVERING
DRY / WET VOLUMES: 12,5 mm +12,5 mm White Drywall Coating(Changes according to demand.)
CEILING INSULATION: 80 mm + 80 mm thick Rockwool(Changes according to demand.)
ASMA TAVAN İNŞAATI: Özel tasarım galvanizli RAL 9002 elektrostatik fırın boyalı omega profillerdir. (Talebe göre değişir.)
BOYALAR
DIŞ : Çift kat silikon dış cephe (İsteğe göre değişiklik gösterir.)
İÇ: Çift kat silikonlu iç cephe boyası (İsteğe göre değişiklik gösterir.)
TAVAN: Çift kat plastik boya (İsteğe göre değişir.)
DIŞ DUVARLAR
DIŞ CİVAR KALINLIĞI: ~ 140mm (İsteğe göre değişiklik gösterir.)
DIŞ DUVAR YÜKSEKLİĞİ : 2800 mm (İsteğe göre değişiklik gösterir.)
DIŞ DUVAR ÇERÇEVESİ : 140*45*12,5 (Dx51) Kalite C Profil
DIŞ KAPLAMA: 11 mm OSB 3 Kaplama + Nem bariyeri + 12 mm Dekoratif Dış Cephe Kaplama (Fibercement-Betopan)
ISI VE SES YALITIMI : 120 mm 50 kg/m³ Taşyünü Yalıtımı
DIŞ DUVAR İÇ KAPLAMA: 12,5 mm +12,5 mm Beyaz Alçıpan Kaplama
İÇ DUVARLAR
İÇ DUVAR KALINLIĞI: ~ 90mm (İsteğe göre değişiklik gösterir.)
İÇ DUVAR YÜKSEKLİĞİ: 2800 mm (İsteğe göre değişiklik gösterir.)
İÇ DUVAR ÇERÇEVESİ: 90* 45*12,5 (Dx51) Kalite C Profil (İsteğe göre değişiklik gösterir.)
İÇ KAPLAMA: 12,5 mm +12,5 mm Beyaz Alçıpan Kaplama (İsteğe göre değişiklik gösterir.)
ISI VE SES YALITIMI: 80 mm 50 kg/m³ Taşyünü Yalıtımı (İsteğe göre değişiklik gösterir.)
ARA ŞASE SİSTEMİ
CARCAS : Rollforming makinelerinde özel şekillendirilmiş profillerden oluşur. Ara kat çelik konstrüksiyon galvanizli özel bükümlü profillerden oluşmaktadır.
ÇERÇEVE ÜST KAPLAMA : 16 mm Betopan (Yanıcı, sudan etkilenmez, B1 Sınıfı (İsteğe göre değişir.)
KAPASİTE: Binanın kullanım amacına göre Avrupa standartlarına uygun olarak alınır . (Talebe göre değişir.
MERDİVEN KASASI: 90* 45*12,5 (Dx51) C Kalite Profilden merdiven kasası (İsteğe göre değişiklik gösterir.)
MERDİVEN KAPLAMASI: 16 mm Betopan (Yanıcı, Su Geçirmez, B1 Sınıfı, Pres Takviyeli) (İsteğe göre değişiklik gösterir.)
